| Environmental Division |
| Product Range |
| |
| |
| |
| |
| |
| |
|
Unicube™ Typical Configurations
Examples of non-standard Configurations
|
Figure A
Shows a Unicube™ 3S with central shower, fitted with three
extra Unicube™ 1MP models, one of which attaches to the standard
straight ahead exit point and the others to extra openings on the
left and right.
|
|
This allows a speedy flow of personnel. For example, three men using this
unit have their own changing and locker room facilities, together with separate
exits.
Figure B
Shows a Unicube™ 3S with extra doors, flaps and flanges on
both sides of the dirty end. This enables a Unicube™ 1S to
be attached as a bagging or storage area.
|
|
The operative is able to pass through the primary shower, then at 90º
through an extra opening in the clean end and into another Unicube™
3S, which acts as secondary decontamination.
It should be noted that an “elephant trunk” could have been
fitted in the dirty end of the Unicube™ 3S instead of the Unicube™
1S – this would allow contaminated materials to be passed through
into a sealed container.
|
Figure C
Shows a Unicube™ 3S joined to the working area with a Unicube™
1MP storage facility to the left, and a link Unicube™ 1MP to
the right, adjoining a double shower Unicube™ 3S.
A final 1MP acts as an exit point.
|
|
AS YOU WILL SEE, THERE ARE AN INFINITE NUMBER OF POSSIBILITIES WITH
THE Unicube™ RANGE.
OUR EXPERTS ARE ONLY TOO HAPPY TO HELP ADVISE WITH ANY SPECIAL CONFIGURATIONS
YOU MAY NEED.
|
Email: GeneralTrading@unionindustries.co.uk
Tel: +44 (0) 113 244 8393 | Fax: +44 (0) 113 242 1307
Union Industries, Angel's Wing, Whitehouse Street, Hunslet, Leeds, LS10
1AD
ISO9001 Certificate No.SP240172 : IAB Registration No. 0044/1 |
