| Size Range : |
Up to 5000mm wide x 5000mm high |
| Applications : |
Sheltered External Location & Internal openings subjected to the effects of pronounced positive or negative pressure. |
Motor : |
In-line helical bevel geared braked motor. Single speed 98 rpm 1.5 kw. Class IP 54.
Opening speed variable up to 1.4 m per second.
Closing speed 0.75 m per second. |
| Control : |
New TST FUE-1-CP 1.5 Kw variable speed Inverter will accept multiple forms of activation signal. Incorporates independent timers to control all aspects of cyclic modes. Enclosures to IP 64. |
Failsafe Devices : |
Safety edge monitored by electronic evaluator. Photocell mounted in door line. |
Limit Switches : |
Stromag 4-Cam In-Line Limit Switch. |
Manual Brake Release : |
Facilitates manual opening of door in the event of an electrical power supply failure. |
Bottom Beam :
|
3-piece composite pressed steel section incorporating sacrificial Easi-fix crash out tabs. |
Side Guide Columns :
|
Fabricated from 250 x 150 x 6 RHS with extra deep formed 3 mm pressed steel blade guides. |
| Counter Balance Assistance : |
Counterweights safely enclosed within the door columns reduce the imposed Service Factor on the drive |
| Top Roll : |
168.3 diameter x 5 mm wall CHS tubing terminating at each end with 35 mm diameter EN8 stub shafts running in self aligning flanged roller bearings.
|
Door Blade : |
Heavy Duty Ramhide 2 ply PVC coated polyester 3.25 mm thick blade incorporates integral wind bracings and possesses enhanced flex resistant properties. All joins high frequency welded. Standard Colour – Alert yellow. |
| Final Transmission : |
5/8” duplex chain drive. |
SEALING
|
|
Top : |
Dual purpose back bar (100 x 100 x 3.6 RHS) Performs the role of top seal and brush seal support.
|
Side :
|
Powder coated 125 x 30 x 18 SWG angle pressing (vermin exclusion as standard).
|
Finish : |
All metal parts fully degreased, zinc phosphate pre-treated and finally polyester powder coated to 70 microns. Colour – grey gloss to RAL 7043.
|
| Door Clearances : |
See clearance drawings. |
OPTIONAL EXTRAS
|
|
Motor : |
- Upgraded gear box for severe arduous applications.
- Zone 1 rated specification (prices on application).
- Soft start options.
|
| Control : |
- 2/3 or partial opening facility.
- Interlinking with other processes or equipment.
- Airlock configurations.
|
| Blade : |
- Fully opaque.
- Clear.
- Non standard colours.
- Hand lettering with company logos/hazard warnings.
|
| Finish : |
- Powder coating in non standard colours.
- Special treatment for external fit applications.
|
| Seals : |
- Vermin exclusion.
- Bird exclusion.
- Non standard top and side when fitting to irregular
- fixing faces.
|
| Top Roll Covers : |
- Powder coated Weather Hoods with subframes and flashings for external locations
- Stainless or Powder Coated Dust Covers for internal locations.
|
| Activation : |
- Radar
- Photocell
- Induction loop (Single, Directional & Safety Loops)
- Radio Control
- Push Button (Single, Double or Mushroom Push Button Stations)
- Pull Cord Switches
|
| Hazard Warnings : |
- Sounders (klaxons/ Sirens )
- Flashing Beacons
- Status Warning Lights
|
| Windbar Systems : |
- Heavy duty single travelling, webbing driven wind bar system to give extra support to the door blade in windy conditions.
- Static Windbar
- 2.5” (up to 4m wide) or 4” diameter 10 gauge Powder Coated Aluminium Tube
|
| Additional Safety Features : |
See Standard Health & Safety Features - HSE guidelines |
